Ex Connectors
InstrumEx
Tamb: -40°C to +60°C. II2GD Exde IIC Gb, ExtD IIIC Db T85. IP66, 67and DTS01 deluge protected.
Certificate No's Baseefa06ATEX0061X and IECEx BAS 06.0018X.
This revolutionary design allows the live mate and de-mating of signal and low power in hazardous areas safely and quickly. The InstrumEx connector is available with two insert options: the 4-way option will accept cores ranging between 0.5mm² and 2.5mm² and can operate up to a maximum current of 10A (AC1) at 250V AC & 2.5A (DC1) 60V DC. The 8-way option, designed predominantly for Ethernet applications, will accept cores ranging between 0.14mm² and 0.37mm² and can carry 1A (AC1) at 60V AC & 0.5A (DC1)60V DC. InstrumEx connectors include an integral Hawke cable gland for easy termination of both armoured and un-armoured cables.
ControlEx
Tamb: -40°C to +60°C. II2 GD Exd IIC ExtD T95. Extb IIIC Db. IP66, 67 and DTS01 deluge protected.
Certificate No's Baseefa03ATEX0355X and IECEx BAS 08.0063X.
The 3rd generation of ControlEx connectors include many features and refinements as a result of consumer feedback, which makes them particularly suitable for control and low/medium power applications. The robust stainless steel body can hold up to 60 contacts and will accept conductor sizes ranging between 0.5mm² and 35mm², operating up to 125A and 660V.
PowerEx
Tamb: -40°C to +60°C. II2 GD Exd IIC ExtD T85. IP66, 67 and DTS01 deluge protected.
Certificate No' Baseefa06ATEX0062X and IECEx BAS 06.0019X.
The PowerEx range of connectors have been designed specifically for the extremely demanding requirements of higher power applications. Inserts are available with 1 to 4 contacts with a conductor acceptance range of between 50mm² and 630mm² operating up to 780A and 750V as standard. Other voltages available on special request.
Accessories
Short Circuit Testing
All contact sizes in the Hawke connector range have been short circuit tested. For further information please contact our Technical department.
Crimp Tool
InstrumEx inserts and ControlEx inserts up to 2.5mm² must be terminated using the Hawke HCT or HCT1 Crimping Tool.
