CSB 656 Cable Gland

Application

Outdoor or Indoor use.
For use with conduit incorporating individual insulated conductors or for particular use with:-
a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillers.
b) Cables that exhibit ‘cold flow’ characteristics.
c) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area and exceeding 2 litres in volume.

Features

Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable or conduit.
Seals conductors at entry to enclosure via conduit or enables an existing Cable Gland to be converted to a barrier type Cable Gland.
The device is fitted with a simple compound filled chamber which permits packing around individual insulated conductors.
Assembly of the Cable Gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure.
The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled. If required, external voids can be repaired.
Provides female running coupler for Cable Gland or conduit entry.
Two part sealing compound and assembly instructions are supplied with the Cable Gland.

Materials & Finishes

The CSB 656 Cable Gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminum.
Brass NPT entries are nickel plated as standard.

Technical Data

Flameproof Exd and Increased Safety Exe. II 2 GD
Baseefa Certificate No. Baseefa06ATEX0058X.
IECEx Certificate No. IECEx BAS 06.0015X.
Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
Suitable for use in Gas Groups IIA, IIB and IIC.
Construction and test standards EN 50014, EN 50018, EN 50019 and EN 50281-1-1. IEC 60079-0, IEC 60079-1 and IEC 60079-7.
IP66, IP67 and IP68 (30 metres for 7 days) ingress protection to IEC 60529 and EN 60529 and NEMA 4X.
DTS01 deluge protection certified by ITS.
Operating temperature range -60°C to +80°C as standard.
Alternative certification options available:
Option available, Exd IIC, Exe II. Certificate No. 1024328 (LR 78713-9).
Marine Approval

CSB 656 Cable Gland

CABLE GLAND SELECTION TABLE
Size Ref.	Male Entry Thread Size			‘H’ Thread Length	Female Entry Thread Size		Inner Sheath/ Cores			'G' Compressed Length	Hexagon Dimensions
	Metric	NPT *			Metric	NPT #	‘D’ Max. Over Cores	‘E’ Max. Inner Sheath	Max. No. Of Cores		Across Flats	Across Corners
		Standard	Option
A	M20	¾"	½"	15	M20	-	11.0	12.5	10	53.5	30.0	34.6
B	M25	1"	¾"	15	M25	-	16.2	18.4	21	53.5	36.0	41.6
C	M32	1¼"	1"	15	M32	-	21.9	24.7	42	56.0	46.0	53.1
C2	M40	1½"	1¼"	15	M40	-	26.3	29.7	60	56.0	55.0	63.5
D	M50	2"	1½"	15	M50	-	37.1	41.7	80	61.4	65.0	75.1
E	M63	2½"	2"	15	M63	-	47.8	53.5	100	63.7	80.0	92.4
F	M75	3"	2½"	15	M75	-	59.0	66.2	120	65.7	95.0	109.6
G	M80	3½"	-	20	M80	-	62.8	74.0	140	67.7	106.4	123.0
H	M90	3½"	-	20	M90	-	70.9	83.0	160	67.7	115.0	132.8
J	M100	4"	-	20	M100	-	80.3	93.0	180	67.7	127.0	146.7
A - F size metric entry threads are 1.5mm pitch as standard. For G size Cable Glands and above, a 2mm pitch is supplied as standard (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering. # NPT female thread sizes equivalent to those shown in the table for the male thread size are available. Hexagon dimensions as shown may alter. All dimensions in millimetres (except * where dimensions are in inches).

For questions or comments on the Hawke International website please e-mail webmaster@ehawke.com
© Hawke International 2002- Hawke International is a division of Hubbell Ltd.
A member of the Hubbell Group Of Companies.
Registered No.669157 in England.
Hawke International, Atlantic Works, Ashton Under Lyne, Lancs, OL7 0NA