701 Cable Gland/Connector
Application
Outdoor or Indoor use.
For use with continuous corrugated aluminum, and interlocked steel
Metal Clad MCHL and Teck type cables.
Features
Provides 360° armour grounding which is fully inspectable.
Grounding device remains in contact with the cable when disassembled for inspection.
Provides an outer deluge seal to prevent moisture ingress to the cable armour and enclosure.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer jacket.
Materials & Finishes
The 701 Cable Gland/Connector is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminum.
Brass NPT entries are nickel plated as standard.
Technical Data
Construction and test standards 
UL Listed wet locations. E165706. UL Certificate E165706.
IP66 and IP67 ingress protection to IEC 60529, EN 60529 and NEMA 4X.
DTSO1 deluge tested by ITS.
Operating temperature range -50°C to +60°C as standard.
Alternative certification options available:
Marine Approval. Certificate No. E-8003
Marine Approval. Certificate No. 06-LD142850D-PDA.
| CABLE GLAND/CONNECTOR SELECTION TABLE | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size Ref. |
Entry Thread Size | Cable Acceptance Details | ‘G’ Compressed Length |
Hexagon Dimensions |
||||||
| NPT | Metric * |
‘E’ Armour Sheath |
‘B’ Outer Jacket |
Across Flats |
Across Corners |
|||||
| Standard | Option | Min. | Max. | Min. | Max. | |||||
| A | ½" | ¾" | M20 | 0.41" | 0.64" | 0.49" | 0.81" | 2.74" | 1.18" | 1.36" |
| B | ¾" | 1" | M25 | 0.49" | 0.93" | 0.66" | 1.02" | 2.95" | 1.42" | 1.64" |
| C | 1" | 1¼" | M32 | 0.85" | 1.23" | 0.87" | 1.30" | 3.04" | 1.81" | 2.09" |
| C2 | 1¼" | 1½" | M40 | 1.17" | 1.59" | 1.10" | 1.61" | 3.09" | 2.17" | 2.50" |
| D | 2" | 1½" | M50 | 1.37" | 1.96" | 1.42" | 2.07" | 3.37" | 2.56" | 2.96" |
| E | 2½" | 2" | M63 | 1.76" | 2.55" | 1.81" | 2.57" | 3.65" | 3.15" | 3.64" |
| F | 3" | 2½" | M75 | 2.29" | 2.98" | 2.24" | 3.07" | 3.73" | 3.74" | 4.31" |
| ‘H’ size cable gland/connector available. Contact Hawke International for details. | ||||||||||
| H | 3½" | 3" | M90 | 2.93" | 3.47" | 3.07" | 3.52" | 4.33" | 4.18" | 4.84" |
| A - F size metric entry threads are 1.5mm pitch as standard with 15mm length of thread. For H size Cable Glands and above, a 2mm pitch is supplied as standard with a 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering. All dimensions in inches (except*). |
||||||||||
701 Cable Gland/Connector
Cable Gland/Connector Ordering Examples
Type/Size/Thread
e.g. 701/C/1" NPT
