123 Cable Gland
Application
The 123 cable gland provides two independent seals on non-armoured elastomer and plastic insulated cables. The first is a compression seal on the inner or outer cable sheath, with additional IP seal on the outer sheath. The cable gland is suitable for installation in industrial applications.
Features
Provides superior cable retention to standard unarmoured cable glands, with seal at two independent points.
Manufactured in brass (standard), nickel plated brass, 316 stainless steel or aluminium.
Brass NPT entries are nickel plated as standard.
Technical Data
Construction and test standards EN 50262. BS 6121 Part 1. Type A2
IP66,IP67 and IP68 (30 metres for 7 days) ingress protection to IEC 60529 and EN 60529 and NEMA 4X.
DTSO1 deluge protection certified by ITS.
Operating temperature range -60°C to +100°C as standard.
| CABLE GLAND SELECTION TABLE | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size Ref. |
Entry Thread Size |
‘H’ Thread Length |
Cable Acceptance Details | ‘G’ Compressed Length |
Hexagon Dimensions |
||||||
| ‘B’ Outer Sheath | |||||||||||
| Metric | NPT * |
Standard Seal |
Alternative (S) Seal |
Across Flats |
Across Corners |
||||||
| Standard | Option | Min. | Max. | Min. | Max. | ||||||
| Os | M20 ‡ | ½" | - | 15.0 | 3.0 | 8.0 | - | - | 40.0 | 24.0 | 27.7 |
| O | M20 ‡ | ½" | - | 15.0 | 7.5 | 11.9 | - | - | 40.0 | 24.0 | 27.7 |
| A | M20 | ¾" | ½" | 15.0 | 11.0 | 14.3 | 8.5 | 13.5 | 40.1 | 30.0 | 34.6 |
| B | M25 | 1" | ¾" | 15.0 | 13.0 | 20.2 | 9.5 | 15.4 | 44.3 | 36.0 | 41.6 |
| C | M32 | 1¼" | 1" | 15.0 | 19.0 | 26.5 | 15.5 | 21.2 | 47.2 | 46.0 | 53.1 |
| C2 | M40 | 1½" | 1¼" | 15.0 | 25.0 | 32.5 | 22.0 | 28.0 | 49.6 | 55.0 | 63.5 |
| D | M50 | 2" | 1½" | 15.0 | 31.5 | 44.4/42.3 † | 27.5 | 34.8 | 64.6 | 65.0 | 75.1 |
| E | M63 | 2½" | 2" | 15.0 | 42.5 | 56.3/54.3 † | 39.0 | 46.5 | 64.8 | 80.0 | 92.4 |
| F | M75 | 3" | 2½" | 15.0 | 54.5 | 68.2/65.3 † | 48.5 | 58.3 | 68.0 | 95.0 | 109.6 |
| G | M80 | 3½" | - | 20.0 | 67.0 | 73.0 | - | - | 68.0 | 106.4 | 123.0 |
| H | M90 | 3½" | - | 20.0 | 67.0 | 77.6 | - | - | 68.0 | 115.0 | 132.8 |
| J | M100 | 4" | - | 20.0 | 75.0 | 91.6 | - | - | 68.0 | 127.0 | 146.7 |
| † Smaller value is applicable when selecting reduced NPT entry option. ‡ Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable outer sheath diameter is 10.9 mm. Os - F size metric entry threads are 1.5mm pitch as standard. For G size Cable Glands and above, a 2mm pitch is supplied as standard (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering. All dimensions in millimetres (except * where dimensions are in inches). |
|||||||||||
123 Cable Gland
Cable Gland Ordering Examples
Type/Size/Thread
e.g. 123/C/M32
123/C/1¼" NPT
Cable Gland with Alternative Seal (S)
e.g. 123/C/M32/S
123/C/1¼" NPT/S
