114 Cable Gland

Application

Outdoor or indoor use.
For use with non-armoured elastomer and plastic insulated cables installed in conduit.

Features

Provides a cable retention seal onto the cables outer sheath.
Provides female running coupler for cable gland or conduit entry.

Materials & Finishes

The 114 cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium.
Brass NPT entries are nickel plated as standard.

Technical Data

Construction and test standards: EN 50262.
Ingress Protection: IP66 to IEC/EN 60529 and NEMA 4X.
Operating Temperature Range: -60°C to +80°C.

CABLE GLAND SELECTION TABLE
Size Ref.	Male Entry Thread Size			Female Entry Thread Size		Cable Acceptance Details				‘G’ Compressed Length	Hexagon Dimensions
						‘B’ Outer Sheath
	Metric	NPT *		Metric	NPT #	Standard Seal		Alternative (S) Seal			Across Flats	Across Corners
		Standard	Option			Min.	Max.	Min.	Max.
A	M20	¾"	½"	M20	-	11.0	14.3	8.5	13.4	56.4	30.0	32.5
B	M25	1"	¾"	M25	-	13.0	20.2	9.5	15.4	48.2	36.0	39.5
C	M32	1¼"	1"	M32	-	19.0	26.5	15.5	21.2	61.6	46.0	50.5
C2	M40	1½"	1¼"	M40	-	25.0	32.5	22.0	28.0	64.6	55.0	60.6
D	M50	2"	1½"	M50	-	31.5	44.4/42.3 †	27.5	34.8	83.2	65.0	70.8
E	M63	2½"	2"	M63	-	42.5	56.3/54.3 †	39.0	46.5	83.2	80.0	88.0
F	M75	3"	2½"	M75	-	54.5	68.2/65.3 †	48.5	58.3	86.4	95.0	104.0
All dimensions in millimetres (except * where dimensions are in inches). Metric entry threads are 1.5mm pitch as standard. † Smaller value is applicable when selecting reduced NPT entry option. # NPT female thread sizes equivalent to those shown in the table for the male thread size are available. Hexagon dimensions as shown may alter.

For questions or comments on the Hawke International website please e-mail webmaster@ehawke.com
© Hawke International 2002- Hawke International is a division of Hubbell Ltd.
A member of the Hubbell Group Of Companies.
Registered No.669157 in England.
Hawke International, Atlantic Works, Ashton Under Lyne, Lancs, OL7 0NA