Adaptors And Reducers Type 476

Application

Provides a means of connection between the equipment and cable glands with dissimilar thread sizes or types.
Available for both Group I & Group II applications.

Materials & Finishes

Type 476 Adaptors/Reducers are manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium (none mining only).
Brass NPT entries are nickel plated as standard.

Technical Data Group I

Flameproof & Increased Safety Exde IM2.
Certificate No. SIRA 06 ATEX 1240U.
Suitable for use in mines.
Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 and IEC/EN 60079-7.
Ingress Protection: IP66.
Operating Temperature Range: -60°C to +80°C.
Alternative certifcation options available:
R-Exe IIU

RINA Certificate No. ELE030710CS

Technical Data Group II

Flameproof & Increased Safety Exde IIC II 2 GD IP66.
Certificate No. SIRA 06 ATEX 1240U.
Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.
Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1 and IEC/EN 60079-7.
Ingress Protection: IP66.
Operating Temperature Range: -60°C to +80°C.

ADAPTOR AND REDUCER SELECTION TABLE
Adaptor Reducer		Male Thread
		Metric								NPT*
		M16	M20	M25	M32	M40	M50	M63	M75	½"	¾"	1"	1¼"	1½"	2"	2½"	3"
	M16
	M20
	M25
	M32
	M40
	M50
	M63
	M75

	½"
	¾"
	1"
	1¼"
	1½"
	2"
	2½"
	3"
All dimensions in millimetres (except * where dimensions are in inches). All metric entry threads are 1.5mm pitch.